Flanges-Products-Industrial Piping Valve Flange Steel Pipe Fitting China

Flanges

HOME

Flange Manufacturer Landee supplies Weld Neck Flange (WN), Long Welding Neck Flange (LWN), Lap Joint Flange (LJ), Blind Flange / Blank Flange (BL), Slip On Flange (SO), Thread Flange (THR), Socket Weld Flange (SW), Reducing Flange, Orifice Flange, Anchor Flange, Spectacle Blind Flange (Figue 8), Spacer Ring/Spade Flange etc…

Flange Standards:
ANSI/ASME Standard: ANSI B16.5, ANSI B16.47 Series A & B, MSS-SP-44, API 605, API6A in class 150 to 2500;
AWWA C207 flanges in Class B, Class D, Class E, Class F, Ring, Blind & Hub;
European DIN, UNI, EN 1092-1, BS 4504, ISO, NS, NFE29203 flanges in Pressure PN6 to PN100;
Japanese JIS B2220 & Korean KS B1503 flanges in pressure 5K to 40K;
Russian GOST 12820-80, GOST 12821-80, GOST 12815-80 in pressure PN0.6MPa to PN10MPa;
South African SABS 1123 / SANS 1123 in Class 600kPa to 4000kPa.

Flange Materials:
Carbon Steel: ASTM A105/A105N
              A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2
              A694 F42, F46, F48, F50, F52, F56, F60, F65, F70
             A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange)
             Steel RST37.2, C22.8
Stainless Steel: ASTM A182 F304/304L, F316/316L, F316H, F316TI, F310, F321;
Alloy Steel: ASTM A182 F1, F5, F9, F11, F22, F91
Duplex & Super Duplext Steel: ASTM A182 F51/UNS S31803, A182 F53/UNS S32750
                           ASTM A182 F55 / UNS S3260

Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Flange Norminal Diameter Range: 1/2” – 96”, DN15-DN2000

Normail Pressure Range: 150# - 2500# (PN6 – PN40)

Landee is a chinese total flow control: valves pipe, flange, pipe fittings manufacturer and supplier. Your Special Pipe Flanges and other Industrial Flange requirements are also available to inquire.

Toggle Content

Blind Flanges

Lap Joint Flanges

Orifice Flanges

Spacer Ring / Spade Flanges

Slip-on Flanges

Socket Weld Flanges

Threaded Flanges

Weld Neck Flanges

Other Flanges

Blind Flanges

A blind Flange is a flange which has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line once it has been sealed. The blind flanges are sometimes machined to accept a pipe of the nominal Size to which reduction is being made. The reduction can be either threaded or welded.
Blind Flange manufacturer Landee supplies Blind Flanges, Industrial Blind Flanges, Blind Fittings in alloy steel, carbon steel, stainless steel, etc.

Toggle Content

View products

Lap Joint Flanges

Lap Joint Flanges (LJ Flanges) are used on piping fitted with lapped pipe or with lap joint stub ends the combined initial cost of the two items being approximately one-third higher than that of comparable welding neck flanges. Their pressure-holding ability is little, if any, better than that of slip-on flanges and the fatigue life of the assembly is only one-tenth that of welding neck flanges. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These flanges are also used in applications where there is a need to facilitate bolt alignment. Their use at points where severe bending stress occurs should be avoided.

Toggle Content

View products

Orifice Flanges

Orifice Flanges are used with orifice plate or flow nozzle for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Orifice flanges generally come with either raised faces or RTJ (Ring Type Joint) facings. Pairs of pressure tappings are machined into the orifice flange, making separate orifice carriers or tappings in the pipe wall unnecessary.

Orifice Flange manufacturer Landee supplies Orifice Flanges, Plate Flanges, Orifice Plates Fittings in alloy steel, forged steel, ductile iron, Stainless Steel etc.

Toggle Content

View products

Spacer Ring / Spade Flanges

In the oil and chemical process industries, a spade is a round piece of metal with a small tab that is placed in between two pipe flanges to give positive isolation from the centre; usually to prevent cross contamination between fluids or to allow work on the line.
Spacer Ring, Spade Flange, Special Flange manufacturer Landee supplies Spacer Rings Flanges, Spade Flanges, Special Flanges made in forged steel, Stainless Steel, alloy steel, etc.

Toggle Content

View products

Slip-on Flanges

Slip on weld Flanges are slipped over the pipe and welded (usually both inside and outside) to provide strength and prevent leakage. Slip-on Flanges are at the low cost end of the scale, and do not require high accuracy when cutting the pipe to length. These SO Flanges can sometimes have a boss or hub, and can be made with a bore to suit either pipe or tube.

Slip-On Flange manufacturer Landee supplies Slip On Flanges, SO Flanges, Slip-On Flanges in forged steel, Stainless Steel, alloy steel, etc.

Toggle Content

View products

Socket Weld Flanges

Socket Weld Flanges (SW Flanges) are similar to slip-on flanges in outline, but the bore is counter-bored to accept pipe. The diameter of the remaining bore is the same as the inside diameter of the pipe. The Socket Welding Flange is attached to the pipe by a fillet weld around the hub of the flange. An optional internal weld may be applied in high stress applications. The Socket Flanges' biggest use is in high pressure systems such as hydraulic and steam lines.

Socket Weld Flange / Fittings manufacturer Landee supplies Socket Welded Flanges, SW Flange, Socket welding Fittings, Socket Flanges in forged steel, Stainless Steel, alloy steel, etc.

Toggle Content

View products

Threaded Flanges

Threaded Flanges are similar to slip-on flanges in outline, but the bore is threaded, thus enabling assembly without welding. This obviously limits its application to relatively low pressure piping systems. Threaded Flanges may be welded around the joint after assembly, but this is not considered a satisfactory method of increasing the flanges' pressure applications.

Threaded Flange manufacturer Landee supplies Threaded Flanges, Thread Fittings, Threaded Pipe Flanges in forged steel, Stainless Steel, alloy steel, etc.

Toggle Content

View products

Weld Neck Flanges

Weld Neck Flanges are flanges that designed to be joined to a piping system by butt welding. the WN Flange is relatively expensive because of its long neck, but is preferred for high stress applications. The neck, or hub, transmits stresses to the pipe, reducing stress concentrations at the base of the Welding-Neck flanges. The gradual transition of thickness from the base of the hub to the wall thickness at the butt weld provides important reinforcement of the Weld Neck flange. The bore of the Weld-Neck flange matches the bore of the pipe, reducing turbulence and erosion.

Weld Neck Flange manufacturer Landee supplies Weld Neck Flanges, WN Flanges, Welding-Neck Fittings in carbon steel, Stainless Steel, alloy steel, etc.

Toggle Content

View products

Other Flanges

Flange Manufacturer Landee Supplies Anchor Flanges, Plate Flanges, Flat Flanges and other Special Flanges for industrial and engineering applications.

Toggle Content

View products

Product List

AWWA C207 Class D Slip-On Flange, ASTM A105, 36 Inch, 150 LB

The AWWA C207 Class D Slip-On Flange is a steel pipe flange designed for waterworks service, featuring a flat face with a smooth gasket contact surface finished per MSS SP-6 standards. This 36-inch (DN900) flange is forged from ASTM A105 carbon steel and rated for Class 150 LB (PN20) working pressure. Its slip-on design allows easy alignment and welding to pipe ends, making it ideal for low-pressure water transmission and distribution systems.

Forged Carbon Steel A105 Ring Flange, UT tested

Ring flange manufacturer Landee supplies carbon steel A105 ring flanges with DN 2000 mm, OD 2338 x ID 2038 x WT 90 mm in size destinated to Spain country.

DN1600 Ring Flange, Carbon Steel ASTM A105, Customized

China Ring Flange manufacturer Landee supplies DN1600 Ring Flange, made of Carbon Steel ASTM A105, DN 1600 MM, OD 1870 MM x ID 1634 MM x WT 55 MM size.

ASTM A182 FF Plate Flange, DN80, PN16, UNI2278-67

China Stainless Steel ASTM A182 Plate Flange Manufacturer Landee Provides ASTM A182 F304L SS Flanges, Flat Face, Size DN80, PN16, UNI2278-67 Standard.

ASTM A105 Flat Plate Flange, EN1092-1, PN16, DN200

China ASTM A105 Plate Flange Manufacturer Landee Provides ASTM A105 Flat Plate Flanges, Flat Face, Pressure PN16, Size DN200, EN 1092-1 01A Standard.

ASTM A182 Back Flange, AWWA Class D, 28 Inch

China ASTM A182 Back Flange, Plate Flange Manufacturer Landee Provides AWWA Class D Standard Back Flanges for Pipe System, ASTM A182 F304, 28 Inch.

S235JR Plate Flange, DIN 2576, DN250, PN10

China S235JR Plate Flange Manufacturer Landee Provides S235JR Plate Flange, Smooth Surface, Standard DIN 2576, DN250 (10 Inch), Pressure PN10.

ASTM A694 F42 Anchor Flange, SCH 80, 8 Inch

China ASTM A694 Anchor Flange Manufacturer Landee Provides ASTM A694 F42 Anchor Flanges, Schedule 80, Class 600, 8 Inch, ANSI B16.5, Black Painting.

Interface Flange, A182 F304, PN16, DN50, DIN 2501

China Interface Flange Manufacturer Landee Offers Quality Interface Flange, ASTM A182 F304, PN16 (150 LB), DN50 (2 Inch), Standard DIN 2501.

Stainless Steel Interface Flange, 2IN 150# DIN2501

China Interface Flange Supplier Landee Offers Stainless Steel Interface Flange, 150LB, 2 Inch, A182 F304, DIN 2501 or according to customers' drawing.

ASTM A182 F304 Plate Flange, PN 16, DN 125

China Plate Flange Manufacturer Landee Offers ASTM A182 F304 Plate Flange，Size DN125 (5 Inch), Pressure PN16 (120 LB), EN1092-1 TYPE 01.

Hot Dip Galvanized Flange, ASME B16.5, 6 Inch, 150 LB

China Hot Dip Galvanized Flange Manufacturer Landee Offers Hot Dip Galvanized Flange, ASTM A105, 6 Inch, 150 LB, ASME B16.5, RF Ends.

< 1 2 3 4...45 >

XIAMEN LANDEE INDUSTRIES CO., LTD.

~~Suite 2201 Huiteng Metropolis, No. 321 Jiahe Road, Xiamen 361012, P.R. China~~

Mr. Kevin Wang

Tel: 86-592-5204188

Fax: 86-592-5204189

Email: kevinwang@landee.cn

Home
Products
- Valves
- Pipe
- Flanges
- Pipe Fittings
- Fasteners
- Steel Plate
- Structural Steel
- Steel Bar
- Pumps
- Equipment
- Others
Solutions
About
News
Contact

Business license